Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.
It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need to find some plastic spacers to help the new pane to fit properly into the frame of the window.
Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they could be trampled on and cause further damage.
After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may want to consider using the security door with an integrated window, since it will provide the best of both worlds.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sliding.
To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in the right position.
If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.
uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform a test fit. The corners of the sash must align with the casing joint. If it doesn't, you can use a screwdriver get more info or a wrench to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is an easy fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously may require removal before a new layer can be put on. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation double glazed window repairs to "over-caulk in get more info order to make the area more difficult to clean and can reduce your energy efficiency.
Make sure that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe situations, you may have to replace the click here window.
Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason if your uPVC window is difficult to open or if it opens in a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Like any mechanical part hinges will be damaged over time. Changing a window hinge is an easy process but it can be simpler with someone else to assist in holding the frame in place.
Verify that the uPVC hinges open and close in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.
The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.
It is also crucial to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. double glazed window repairs WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it may be required to realign them. The interlock, which is located on the hinge side of the window, can also become misaligned, again it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.
The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the possibility of draughts.
Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. They can help block out cold air and keep your home warm and cozy!
Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as you can.